Required for assembly: file, filler, two part epoxy glue, super glue, (springs included), fine grease, modeling knives. Paint: car primer, mat black, silver or alluminium. Study with attention the instruction pages before start to assembly the gun. Test fit each parts before gluing together. You may need to clean the pieces by putting of medium grade sandpaper (400/600 grade), also you could have to fill some air bubble. When you are happy with the fit of each parts, you can start to paint them, use a primer so you can easily detect other small imperfection, when you are satisfied of the primered surface, paint all parts, for a better result finish with a coat of clear paint. |
 |
Wash all parts thoroughly with soap and warm water. After paint all parts with primer coat use a filler for the air buble and imperfection.Lightly wetsand all parts. |
|
|
When you are satisfied of the result spray the handle parts with semi flat black color, for the main body with four barrels section use alluminium or silver paint, alluminium color for the bullets also. |
 |
To shine all metal parts wetsanding them with 600 grade then use more fine sand paper of 800 grade. |
 |
Use a dremel motor tool with bras brush to obtain a very shine surfaces (chrome like). |
|
|
