Required for assembly: file, filler, two part epoxy glue, super glue, (screws included), (springs included), fine grease, modeling knives. Paint: car primer, mat black, clear. Study with attention the instruction pages before start to assembly the gun. Test fit each parts before gluing together. You may need to clean the pieces by putting of medium grade sandpaper (400/600 grade). When you are happy with the fit of each parts, you can start to paint them, use a primer so you can easily detect other small imperfection, when you are satisfied of the primered surface, paint all parts with black color, for a better result finish with a coat of clear paint.Use the 5-minutes epoxy glue to join all parts that compose the barrels. |
 |
Star sanding the parts that you decide to left in metal color. Use a fine grade of sndpaper and dip it in the wather to prevent the saturation.When you are satisfied of the surface, that must to apear smooth, you are ready to shine all with a dremel tool using a brass brush.Shine all parts in the same way to obtain a shine surface.Your final result must be similar to chrome like. |
|
|
|
|
|
|
Check that grips fit on handle frame. |
|
|
|
|
